Countershaft rear bearing
- Make
- Mazda
- Model
- MX-5 (NA) Factory Workshop Manual
- Year
- 1990–1992
- Section
- [No badge] › Countershaft rear bearing
Manual transmissionCountershaft rear bearing
Countershaft rear bearing
Remove the countershaft rear bearing with the SST.
Locknut (Mainshaft)
- Shift the clutch hub sleeves to first gear and reverse gear to put the gears in the double-engaged condition.
Caution
• Do not reuse the locknut.
• Do not damage the mainshaft and clutch hub assembly.
- Use a suitable tool to uncrimp the tabs of the locknut.
Note
• Use pads in the vise to prevent damaging the bearing housing.
- Secure the bearing housing in a vise.
- Remove the locknut with the SST.
Main drive gear bearing
Remove the main drive gear bearing with a suitable pipe.
Countershaft front bearing
Remove the countershaft front bearing with the SST.
Bearing housing assembly
Remove the bearing housing by lightly tapping the countershaft with a copper hammer.
Parts & tools for this job For 1990 Mazda MX-5
- PARTClutch kitSearch: Mazda MX-5 1990 clutch kit
- TOOLClutch alignment toolSearch: clutch alignment tool
- FLUIDGear oilSearch: Mazda MX-5 manual gearbox oil
Links open Amazon search results in a new tab. As an Amazon Associate I earn from qualifying purchases.