Inspection
- Make
- Mazda
- Model
- MX-5 (NA) Factory Workshop Manual
- Year
- 1990–1992
- Section
- Transmission oil › Inspection
Manual transmissionInspection
INSPECTION
- Remove check plug (A).
- Verify that the oil is at the bottom of the check plug hole. If it is low, add the specified oil from check plug (A).
- Wipe clean and apply sealant to the plug threads before installing.
Tightening torque:
(A): 25—39 N·m (2.5—4.0 m-kg, 18—29 ft-lb)
REPLACEMENT
Note
- Replace drain plug (B) washer with a new one whenever the drain plug is removed.
- Remove the plugs ((A) and (B) with washer).
- Drain the oil into a suitable container.
- Wipe all plugs clean.
- Apply sealant to plug thread (A).
- Install the drain plug ((B) with new washer).
Tightening torque:
(B): 39—59 N·m (4.0—6.0 m-kg, 29—43 ft-lb)
- Add the specified oil from check plug (A) port until the level reaches the bottom of check plug hole.
Specified oil:
API service GL-4 or GL-5
All-season: SAE 75W-90
Above 10°C (50°F): SAE 80W-90
- Install plug (A).
Tightening torque:
(A): 25—39 N·m (2.5—4.0 m-kg, 18—29 ft-lb)
Parts & tools for this job For 1990 Mazda MX-5
- PARTOil filterSearch: Mazda MX-5 1990 oil filter
- TOOLOil filter wrenchSearch: oil filter wrench
- FLUIDEngine oilSearch: Mazda MX-5 engine oil
Links open Amazon search results in a new tab. As an Amazon Associate I earn from qualifying purchases.