Inspection
- Make
- Mazda
- Model
- MX-5 (NA) Factory Workshop Manual
- Year
- 1990–1992
- Section
- L Propeller shaft › Inspection
Propeller shaftInspection
- When the propeller shaft is removed from the extension housing, immediately install the SST to prevent oil leakage.
INSPECTION
Propeller shaft
Note
- Clean the propeller shaft (except universal joints) thoroughly with a steam cleaner or cleaning solvent before inspection.
- Measure the propeller shaft runout with a dial indicator. Replace the propeller shaft if runout is excessive.
Maximum runout: 0.4mm (0.016 in)
- Move the universal joints in the directions shown, and check for universal joint looseness.
If there is looseness, replace the propeller shaft. - Check operation of the universal joint.
If the universal joint has excessive resistance, replace the propeller shaft.
Installation Note
- Align the marks, and install the propeller shaft.
Tightening torque:
27—30 N·m (2.8—3.1 m·kg, 20—22 ft-lb)
- Check that there is no abnormal noise or vibration when driving the vehicle.
If noise or vibration occurs from the propeller shaft, replace the propeller shaft.
Parts & tools for this job For 1990 Mazda MX-5
- TOOLTorque wrenchSearch: 3/8 inch torque wrench
- TOOLSocket setSearch: socket set metric
- BOOKHaynes manualSearch: Haynes manual Mazda MX-5
Links open Amazon search results in a new tab. As an Amazon Associate I earn from qualifying purchases.