Disassembly note
- Make
- Mazda
- Model
- MX-5 (NA) Factory Workshop Manual
- Year
- 1990–1992
- Section
- Disassembly (M) › Disassembly note
Front and rear axlesDisassembly note
Disassembly note
Output shafts
Remove the output shafts with two pry bars as shown in the figure.
Differential case
Caution
- Do not strike the aluminum alloy differential case.
Strike the differential carrier with a copper hammer to separate it from the case.
Differential gear assembly
Mount the differential gear assembly on the SST.
Bearing caps
Mark one bearing cap and the carrier.
Adjuting nuts
Mark one adjusting nuts and the carrier.
Locknut (Companion flange)
Hold the companion flange with the SST and remove the locknut.
Companion flange
Pull the companion flange off with the SST.
Parts & tools for this job For 1990 Mazda MX-5
- PARTFront wheel bearingSearch: Mazda MX-5 1990 front wheel bearing
- TOOLBearing puller kitSearch: wheel bearing puller kit
- PARTCV boot kitSearch: Mazda MX-5 1990 cv boot kit
Links open Amazon search results in a new tab. As an Amazon Associate I earn from qualifying purchases.