Hub bolt
- Make
- Mazda
- Model
- MX-5 (NA) Factory Workshop Manual
- Year
- 1990–1992
- Section
- M Front and rear axles › Hub bolt
Front and rear axlesHub bolt
Hub bolt
Caution
- Do not remove the hub bolts if not necessary.
- Do not reuse the removed hub bolts.
Press out the hub bolts.
Assembly note
Hub bolt
Press in new hub bolts.
Dust cover
- Mark the new dust cover as the removed one.
- Align the marks of the new dust cover and the knuckle.
- Install the new dust cover with the SST.
Wheel bearing
Press the new wheel bearing into the knuckle with the SST.
Parts & tools for this job For 1990 Mazda MX-5
- PARTFront wheel bearingSearch: Mazda MX-5 1990 front wheel bearing
- TOOLBearing puller kitSearch: wheel bearing puller kit
- PARTCV boot kitSearch: Mazda MX-5 1990 cv boot kit
Links open Amazon search results in a new tab. As an Amazon Associate I earn from qualifying purchases.