Operation inspection
- Make
- Mazda
- Model
- MX-5 (NA) Factory Workshop Manual
- Year
- 1990–1992
- Section
- Operation inspection › Operation inspection
Front and rear axlesOperation inspection
OPERATION INSPECTION
Viscous Limited Slip Differential
- Turn off the engine and shift the transmission into reverse.
- Block the front wheels with wheel chocks.
- Jack up the rear wheels and support the vehicle with safety stands.
- Release the parking brake.
- Using a torque wrench on a wheel lug nut, measure the time it takes to turn the wheel 90° while applying the specified torque.
Specified torque: 15 N·m (1.5 m-kg, 11 ft-lb)
Specified time: 4.0 sec. min.
- If not as specified, replace the viscous limited slip differential and fill the differential with new specified oil.
(Refer to pages M–24, 32.)
Parts & tools for this job For 1990 Mazda MX-5
- PARTFront wheel bearingSearch: Mazda MX-5 1990 front wheel bearing
- TOOLBearing puller kitSearch: wheel bearing puller kit
- PARTCV boot kitSearch: Mazda MX-5 1990 cv boot kit
Links open Amazon search results in a new tab. As an Amazon Associate I earn from qualifying purchases.