Caution
- Make
- Mazda
- Model
- MX-5 (NA) Factory Workshop Manual
- Year
- 1990–1992
- Section
- Disassembly / Assembly / Inspection › Caution
Braking systemCaution
- After removing the brake fluid, disassemble in the order shown in the figure, referring to Disassembly Note.
- Inspect all parts and repair or replace as necessary.
- Assemble in the reverse order of removal, referring to Assembly Note.
Caution
- Secure the master cylinder flange in a vise when necessary.
- Replace the piston assembly if necessary.
- Do not let foreign material enter the cylinder, and do not scratch the inside of the cylinder or the outer surface of the piston.
- Fluid level sensor
- Screw
- Reservoir assembly
Inspect for damage and deformation - Bushings
- Stopper screw and O-ring
- Snap ring
- Primary piston assembly
Inspect for abnormal wear, rust, and damage - Secondary piston assembly
Inspect for abnormal wear, rust, and damage - Cylinder
Inspect for abnormal wear, rust, and damage
Parts & tools for this job For 1990 Mazda MX-5
- TOOLTorque wrenchSearch: 3/8 inch torque wrench
- TOOLSocket setSearch: socket set metric
- BOOKHaynes manualSearch: Haynes manual Mazda MX-5
Links open Amazon search results in a new tab. As an Amazon Associate I earn from qualifying purchases.