Quick Inspection, On-vehicle
- Make
- Mazda
- Model
- MX-5 (NA) Factory Workshop Manual
- Year
- 1990–1992
- Section
- Front brake (DISC) › Quick Inspection, On-vehicle
Braking systemQuick Inspection, On-vehicle
Quick Inspection, On-vehicle
Disc pad
- Jack up the front of the vehicle and support it with safety stands.
- Remove the wheels.
- Sight through the caliper inspection hole and verify the remaining thickness of the pad.
Thickness: 1.0mm (0.04 in) min.
Replacement
Disc pad
- Remove in the order shown in the figure.
- Install in the reverse order of removal, referring to Installation Note.
- Lock bolt
- Disc pad
- Outer shim
- Inner shim
- Guide plate
Removal
Lock bolt
- Remove the lower lock bolt.
- Rotate the caliper upward and support it with a piece of rope.
Parts & tools for this job For 1990 Mazda MX-5
- PARTFront brake padsSearch: Mazda MX-5 1990 front brake pads
- TOOLCaliper piston rewind toolSearch: brake caliper piston rewind tool
- FLUIDBrake fluidSearch: brake fluid
Links open Amazon search results in a new tab. As an Amazon Associate I earn from qualifying purchases.