Caution
- Make
- Mazda
- Model
- MX-5 (NA) Factory Workshop Manual
- Year
- 1990–1992
- Section
- Removal / Inspection / Installation › Caution
Braking systemCaution
- Remove in the order shown in the figure.
- Inspect all parts and repair or replace as necessary.
- Install in the reverse order of removal.
- After installation, check and adjust the pedal height and free play if necessary.
Caution
• Apply grease to the inner surface of the bushing and to the contact surfaces of the clevis pin and spring.
- Spring clip
- Clevis pin
- Nut
- Spring washer
- Bolt
- Return spring
Inspect for weakness and damage - Brake pedal
Inspect for bending - Guide pipe
- Bushing
Inspect for wear - Stopper rubber
Inspect for wear - Pedal pad
Inspect for wear and damage
Parts & tools for this job For 1990 Mazda MX-5
- TOOLTorque wrenchSearch: 3/8 inch torque wrench
- TOOLSocket setSearch: socket set metric
- BOOKHaynes manualSearch: Haynes manual Mazda MX-5
Links open Amazon search results in a new tab. As an Amazon Associate I earn from qualifying purchases.