Removal Note
- Make
- Mazda
- Model
- MX-5 (NA) Factory Workshop Manual
- Year
- 1990–1992
- Section
- Balance spring › Removal Note
BodyRemoval Note
Removal Note
Balance spring
- Lift the balance spring with a protected screwdriver.
- Remove the balance spring.
Warning
• Use care when removing the balance spring; personal injury could result.
Adjustment
Trunk lid
Loosen the trunk lid mounting nuts and adjust as shown.
Balance spring
Slide the balance spring to the desired position as described below with a protected screwdriver.
| Tension | Hinge | Set position | |
|---|---|---|---|
| a | b | ||
| Standard | Left side | ○ | |
| Right side | ○ | ||
| Increase | Left side | ○ | |
| Right side | ○ | ||
| Decrease | Left side | ○ | |
| Right side | ○ | ||
○: Indicated position
Warning
• Use care when moving the balance spring; personal injury could result.
Parts & tools for this job For 1990 Mazda MX-5
- TOOLCoil spring compressorSearch: coil spring compressor
- TOOLBall joint separatorSearch: ball joint separator
- PARTShock absorbersSearch: Mazda MX-5 1990 shock absorbers
Links open Amazon search results in a new tab. As an Amazon Associate I earn from qualifying purchases.