1. Vertical adjustment of door glass
- Make
- Mazda
- Model
- MX-5 (NA) Factory Workshop Manual
- Year
- 1990–1992
- Section
- S Body › 1. Vertical adjustment of door glass
Body1. Vertical adjustment of door glass
1. Vertical adjustment of door glass
Adjustment procedure
Remove the weatherstrip, and check alignment with the door glass in the fully-closed position.
- Loosen upper stop installation bolts (A).
- Adjust by moving the upper stop up or down so that the upper edge of the door glass is in the correct position, and then tighten bolts (A).
Note
- When the door glass is raised, both glass stop must contact the upper stop simultaneously.
- Before an upper stop is moved for adjustment, lower the door glass slightly.
Parts & tools for this job For 1990 Mazda MX-5
- TOOLTrim removal tool kitSearch: trim removal tool kit
- PARTTouch-up paintSearch: Mazda touch up paint
- PARTPanel clip assortmentSearch: Mazda panel clips assortment
Links open Amazon search results in a new tab. As an Amazon Associate I earn from qualifying purchases.