Adjustment
- Make
- Mazda
- Model
- MX-5 (NA) Factory Workshop Manual
- Year
- 1990–1992
- Section
- S Body › Adjustment
BodyAdjustment
Adjustment
Convertible top/Detachable hard top
The alignment of either top to the windshield header may be adjusted up, down, fore, and aft by turning the respective top latch assembly adjusting nut.
Adjustment procedure
- Fold the protector away from the adjusting nut.
- When the adjusting nut is turned clockwise:
Clearance (A) and height (B) of the top become less. - When the adjusting nut is turned counterclockwise:
Clearance (A) and height (B) of the top become greater.
Caution
- Secure the adjusting nut with the protector after completing any adjustment.
Detachable hard top
If engagement of the striker and the side latch assembly is too tight or too loose, adjustment is made through the latch assembly adjusting nut.
Adjustment procedure
- Fold the protector away from the adjusting nut.
- When the adjusting nut is turned clockwise:
Engagement of the striker and the side latch assembly becomes tighter. - When the adjusting nut is turned counterclockwise:
Engagement of the striker and the side latch assembly becomes looser.
Caution
Parts & tools for this job For 1990 Mazda MX-5
- TOOLTrim removal tool kitSearch: trim removal tool kit
- PARTTouch-up paintSearch: Mazda touch up paint
- PARTPanel clip assortmentSearch: Mazda panel clips assortment
Links open Amazon search results in a new tab. As an Amazon Associate I earn from qualifying purchases.