Emergency locking retractor (elr)
- Make
- Mazda
- Model
- MX-5 (NA) Factory Workshop Manual
- Year
- 1990–1992
- Section
- Inspection › Emergency locking retractor (elr)
BodyEmergency locking retractor (elr)
EMERGENCY LOCKING RETRACTOR (ELR)
Inspection
- Verify that the belt can be pulled out smoothly, and that it moves smoothly when worn.
- Verify that the retractor locks when the belt is quickly pulled.
- Remove the retractor.
- Hold the retractor as it would be installed.
- Slowly incline the retractor while pulling out the belt.
- Verify that the retractor locks at approx. 30 degrees inclination.
WEBBING
Inspection
Inspect the webbing for scars, tears, and wear and for deformation of the fittings.
BUCKLE SWITCH
Inspection
- Disconnect the seatbelt buckle switch connector.
- Check continuity of the switch.
| Seatbelt | Continuity |
|---|---|
| Buckled | No |
| Unbuckled | Yes |
- If continuity is not as specified, replace the switch.
Parts & tools for this job For 1990 Mazda MX-5
- TOOLTrim removal tool kitSearch: trim removal tool kit
- PARTTouch-up paintSearch: Mazda touch up paint
- PARTPanel clip assortmentSearch: Mazda panel clips assortment
Links open Amazon search results in a new tab. As an Amazon Associate I earn from qualifying purchases.