Trouble shooting
- Make
- Mazda
- Model
- MX-5 (NA) Factory Workshop Manual
- Year
- 1990–1992
- Section
- Trouble shooting › Trouble shooting
BodyTrouble shooting · page 1 of 2
Wiper does not operate in Lo or Hi position
- Check WIPER 20A fuse
- NG: Short circuit
- OK: Turn ignition switch ON
- Check for 12V at terminal-wire (L) of windshield wiper switch connector
- NG: Repair harness (Fuse box—Switch)
- OK: Check for 12V at terminal-wires (L/R) and (L/W) of switch connector with switch, as shown
- • Lo: (L/W) 12V
- • Hi : (L/R) 12V
- Check for 12V at terminal-wires (L/R) and (L/W) of wiper motor connector with switch, as shown
- • Lo: (L/W) 12V
- • Hi : (L/R) 12V
- NG: Repair (L/W) or (L/R) wire harness (Switch—Wiper motor)
- OK: Check for continuity of motor terminal-wire (B) to ground
- NG: Repair brush plate holder (Refer to page S–37)
- OK: Check wiper motor (Refer to page S–34)
Wiper automatic park function does not work
- Turn ignition switch ON
- Check for 12V at terminal-wire (L) of wiper motor connector
- NG: Repair harness (Fuse box—Wiper motor)
- OK: Check wiper motor (Refer to page S–34)
Parts & tools for this job For 1990 Mazda MX-5
- TOOLTrim removal tool kitSearch: trim removal tool kit
- PARTTouch-up paintSearch: Mazda touch up paint
- PARTPanel clip assortmentSearch: Mazda panel clips assortment
Links open Amazon search results in a new tab. As an Amazon Associate I earn from qualifying purchases.