Wiper motor
- Make
- Mazda
- Model
- MX-5 (NA) Factory Workshop Manual
- Year
- 1990–1992
- Section
- Troubleshooting (For Canada) › Wiper motor
BodyWiper motor
Washer does not operate (Wiper operates OK) (For Canada)
- Turn ignition switch ON
- Check for 12V at terminal-wire (L) of windshield washer motor connector with washer switch ON
- NG: Repair harness (Fuse—Motor)
- OK: Go to next step
- Check washer motor (Refer to page S–34)
- NG: Replace washer motor
- OK: Go to next step
- Check for continuity of terminal-wire (L/O) between washer motor and windshield wiper switch
- NG: Repair harness (Motor—Switch)
- OK: Go to next step
- Disconnect windshield wiper switch 6-pin connector; check for continuity of terminal-wire (B) to ground
- NG: Repair harness (Switch—Ground)
- OK: Check windshield washer switch (Refer to Section T)
WIPER MOTOR
Inspection
Check for continuity between the terminals with the wiper is in parked position.
| Terminals | Continuity | Terminals | Continuity |
|---|---|---|---|
| a—b | No (Yes) | b—c | No (Yes) |
| a—c | Yes (Yes) | b—d | No (Yes) |
| a—d | Yes (Yes) | c—d | Yes (Yes) |
( ): CANADA
Check operation by applying 12V and a ground to the terminals of the motor connector.
| Terminal | Operation speed |
|---|---|
| 12V | |
| a (c) | Low |
| c (a) | High |
( ): CANADA
WASHER MOTOR
Inspection
Connect 12V to terminal B and a ground to terminal A, and verify that the motor operates.
FRONT WIPER AND WASHER SWITCH
Inspection
Refer to Section T.
Parts & tools for this job For 1990 Mazda MX-5
- PARTWiper bladesSearch: Mazda MX-5 1990 wiper blades
- PARTWasher pumpSearch: Mazda MX-5 1990 washer pump
Links open Amazon search results in a new tab. As an Amazon Associate I earn from qualifying purchases.