Step 1
- Make
- Mazda
- Model
- MX-5 (NA) Factory Workshop Manual
- Year
- 1990–1992
- Section
- Cassette Tape Player › Step 1
Body electrical systemStep 1
Symptom: Poor sound quality.
Note
- Before troubleshooting, verify that the customer is using the audio system correctly. If not, instruct him/her in the proper operating procedurer. (Refer to pages T–110.)
- If a speaker(s) do not operate, refer to “Speaker(s) do not operate”. (pages T–115 or 117).
05U0TX-265
Step 1
- Play a known good tape, and check the sound quality.
- If sound quality is normal, the previous tape is defective. The system is OK.
- If sound quality is still poor, go to Step 2.
05U0TX-340
Step 2
- Check for oxide or dirt on the head, capstan, and pinchroller.
- If oxide or dirt is found, clean the parts with a head cleaner.
- If there is no oxide or dirt, go to Step 3.
9MU0TX-380
Step 3
- Check for damage to the speakers.
- Check for proper connection of the speaker connectors.
- Disconnect all speaker connectors, and measure resistance of each speaker.
Resistance: 4Ω
- If a speaker has incorrect resistance or is damaged, replace it.
- If the speakers are OK, go to Step 4.
05U0TX-341
Step 4
- Compare sound quality with that of another vehicle that has the same type of audio system.
- If the sound quality is inferior to the other unit, replace the audio unit.
9MU0TX-382
Parts & tools for this job For 1990 Mazda MX-5
- TOOLDigital multimeterSearch: automotive digital multimeter
- PARTAssorted fuse kitSearch: car fuse assortment kit
- TOOLWire crimper and connector kitSearch: wire crimper connector kit
Links open Amazon search results in a new tab. As an Amazon Associate I earn from qualifying purchases.