Inspection
- Make
- Mazda
- Model
- MX-5 (NA) Factory Workshop Manual
- Year
- 1990–1992
- Section
- FUEL GAUGE Inspection (T) › Inspection
Body electrical systemInspection
Inspection
Preparation
SST
49 0839 285
Checker, fuel and thermometer
For inspection of gauges
- Remove the instrument cluster. (Refer to page T–33.)
- Apply 12V to terminal 2k and ground terminal 2j.
- Connect the red lead of the SST to terminal 1a and the black lead to a ground.
- Set the SST to the resistance values shown in the figure.
- Verify that the needle indicates the correct values.
Caution
- Continue the above checks for at least two minutes each to correctly judge the condition.
- The allowable indication error is twice the width of the needle.
OIL PRESSURE GAUGE
Inspection
Preparation
SST
49 0839 285
Checker, fuel and thermometer
For inspection of gauges
- Remove the instrument cluster. (Refer to page T–33.)
- Apply 12V to terminal 2k and ground terminal 2j.
- Connect the red lead of the SST to terminal 2b and the black lead to a ground.
Parts & tools for this job For 1990 Mazda MX-5
- TOOLDigital multimeterSearch: automotive digital multimeter
- PARTAssorted fuse kitSearch: car fuse assortment kit
- TOOLWire crimper and connector kitSearch: wire crimper connector kit
Links open Amazon search results in a new tab. As an Amazon Associate I earn from qualifying purchases.