Step 1
- Make
- Mazda
- Model
- MX-5 (NA) Factory Workshop Manual
- Year
- 1990–1992
- Section
- Radio › Step 1
Body electrical systemStep 1
Symptom: Poor sound quality or noise
Step 1
- Tune to the strongest AM station using the automatic memory function. (Refer to pages T–111.)
- If the automatic memory function does not operate, go to Step 4.
- Compare sound quality with that of another vehicle that has the same type audio unit.
- If the sound quality is inferior to the other unit, go to Step 2.
- If the sound quality is the same as the other unit, the system is OK.
Step 2
- Play a known good cassette tape, and compare the sound quality with another vehicle that has the same type audio unit.
- If the sound quality is inferior to the other unit, the malfunction may be in the speaker circuit. Go to Step 3.
- If the sound quality is same as the other unit, the malfunction may be in the antenna circuit. Go to Step 4.
Step 3
- Check for damage to the speakers.
- Check for proper connection of speaker connectors.
- Disconnect the speaker connectors, and measure resistance of each speaker.
Resistance: 4Ω
- If a speaker has incorrect resistance or is damaged, replace it.
- If the speakers are OK, replace the audio unit.
Step 4
- Check that there is no continuity (infinite ohms) between the mast antenna and a body ground.
- If there is continuity, replace the antenna.
- If there is no continuity, go to Step 5.
Parts & tools for this job For 1990 Mazda MX-5
- TOOLDigital multimeterSearch: automotive digital multimeter
- PARTAssorted fuse kitSearch: car fuse assortment kit
- TOOLWire crimper and connector kitSearch: wire crimper connector kit
Links open Amazon search results in a new tab. As an Amazon Associate I earn from qualifying purchases.