Inspection
- Make
- Mazda
- Model
- MX-5 (NA) Factory Workshop Manual
- Year
- 1990–1992
- Section
- Removal / Installation › Inspection
Body electrical systemInspection
Inspection
Turn signal switch
(U.S. spec.)
- Remove the knee protector.
- Disconnect the combination switch connector.
- Check continuity between terminals of the switch.
| Switch | Terminal | ||
|---|---|---|---|
| FU | TL | TR | |
| Left | ○ | ○ | |
| Right | ○ | ○ | |
○——○: Indicates continuity
- If not as specified, replace the combination switch as an assembly.
(Canada spec.)
- Remove the column cover, then disconnect the turn signal switch connector.
- Check for continuity between terminals of the switch.
○——○: Indicates continuity
- If not as specified, replace the turn signal switch.
Hazard warning switch
- Remove the hazard switch.
- Check continuity between terminals of the switch.
○——○: Indicates continuity
- If not as specified, replace the hazard switch and retractor switch as an assembly.
Parts & tools for this job For 1990 Mazda MX-5
- TOOLDigital multimeterSearch: automotive digital multimeter
- PARTAssorted fuse kitSearch: car fuse assortment kit
- TOOLWire crimper and connector kitSearch: wire crimper connector kit
Links open Amazon search results in a new tab. As an Amazon Associate I earn from qualifying purchases.