Remedy
- Make
- Mazda
- Model
- MX-5 (NA) Factory Workshop Manual
- Year
- 1990–1992
- Section
- Seat Belt Warning Lamp › Remedy
Body electrical systemRemedy
Note
• The seat belt warning lamp is controlled by the timer and buzzer unit.
Symptom: Seat belt warning lamp remains on six seconds after ignition switch turned ON. (Timer function does not operate.)
Remedy
- Disconnect the timer and buzzer unit connector.
- Turn the ignition switch ON, and verify that the seat belt warning lamp illuminates.
| Warning lamp illuminates | Action |
|---|---|
| No | Replace timer and buzzer unit |
| Yes | Repair wiring harness (Instrument cluster — timer and buzzer unit) |
Symptom: Seat belt warning lamp does not illuminate when ignition switch first turned ON.
Step 1
- Ground terminal J of the timer and buzzer unit connector.
- Turn the ignition switch ON, and verify that the seat belt warning lamp illuminates.
| Warning lamp illuminates | Action |
|---|---|
| No | Go to Step 2 |
| Yes | Repair wiring harness (Timer and buzzer unit—body ground) |
Step 2
- Ground terminal D of the timer and buzzer unit connector.
- Turn the ignition switch ON, and verify that the seat belt warning lamp illuminates.
| Warning lamp illuminates | Action |
|---|---|
| Yes | Replace timer and buzzer unit |
| No | Check bulb of seat belt warning lamp If bulb is OK, repair wiring harness (Instrument cluster—timer and buzzer unit) |
Parts & tools for this job For 1990 Mazda MX-5
- PARTReplacement bulbsSearch: Mazda MX-5 1990 bulbs
- TOOLDigital multimeterSearch: automotive digital multimeter
Links open Amazon search results in a new tab. As an Amazon Associate I earn from qualifying purchases.