Service precaution
- Make
- Mazda
- Model
- MX-5 (NA) Factory Workshop Manual
- Year
- 1990–1992
- Section
- Service precaution › Service precaution
Body electrical systemService precaution
SERVICE PRECAUTION
1. BEFORE COMPONENT REPLACEMENT
- Obtain the code number and deactivate the audio anti-theft function before disconnecting the battery. (Refer to page T–113.)
- Before replacement of any air bag system component or before disconnecting any connector of the system, first disconnect the negative battery cable; then disconnect the clock spring connectors (orange and blue).
2. PROHIBITATION OF COMPONENT DISASSEMBLY AND WIRE HARNESS REPAIR
- The components of the air bag system are not intended to be disassembled for service.
If a component failure is detected by the diagnostic module, replace the suspected component after checking the connections and the wire harness. Do not disassemble any component. - If an open circuit is found by a continuity test, replace the wire harness. Do not try to repair the wiring.
3. HANDLING OF AIR BAG MODULE
- Do not use an ohmmeter for inspection of the air bag module, it may cause an accidental deployment of the air bag.
- When carrying a live (unactivated) air bag module, make sure the trim cover is pointed away from your body to prevent personal injury in the event of an accidental deployment.
Parts & tools for this job For 1990 Mazda MX-5
- TOOLDigital multimeterSearch: automotive digital multimeter
- PARTAssorted fuse kitSearch: car fuse assortment kit
- TOOLWire crimper and connector kitSearch: wire crimper connector kit
Links open Amazon search results in a new tab. As an Amazon Associate I earn from qualifying purchases.