Brake Warning Lamp
- Make
- Mazda
- Model
- MX-5 (NA) Factory Workshop Manual
- Year
- 1990–1992
- Section
- Troubleshooting › Brake Warning Lamp
Body electrical systemBrake Warning Lamp
Note
• Check the METER 10A fuse in the fuse box before troubleshooting. If normal, refer to the following troubleshooting.
Brake Warning Lamp
F1 Symptom: Brake warning lamp remains illuminated.
05U0TX-288
Step 1 — Check brake fluid level
Check brake fluid level.
| F3 | Brake fluid level | Action |
|---|---|---|
| Below MIN | Check brake system (Refer to Section P) |
|
| Above MIN | Go to Step 2 |
Step 2 — Check parking brake switch
- Disconnect the parking brake switch connector.
- Check continuity between the terminal of the switch and a body ground.
| F4 | Lever | Continuity |
|---|---|---|
| Pulled one notch | Yes | |
| Released | No |
- If not as specified, adjust or replace the parking brake switch.
(Refer to Section P.) - If the switch is OK, go to Step 3.
Step 3 — Check brake fluid level sensor
- Check continuity of the sensor.
| F5 | Brake fluid level | Continuity |
|---|---|---|
| Below MIN | Yes | |
| Above MIN | No |
- If not as specified, replace the level sensor.
- If the sensor is OK, repair the wiring harness.
Parts & tools for this job For 1990 Mazda MX-5
- PARTReplacement bulbsSearch: Mazda MX-5 1990 bulbs
- TOOLDigital multimeterSearch: automotive digital multimeter
Links open Amazon search results in a new tab. As an Amazon Associate I earn from qualifying purchases.