Step 1
- Make
- Mazda
- Model
- MX-5 (NA) Factory Workshop Manual
- Year
- 1990–1992
- Section
- Troubleshooting › Step 1
Body electrical systemStep 1
Symptom: Back-up light(s) does not operate.
Step 1
Check METER 10A fuse.
If the fuse is burned, replace it. Check and repair the wire harness, if necessary.
If the fuse is OK, go to Step 2.
Step 2
Check the back-up light bulbs.
If a bulb is burned, replace it.
If the bulbs are OK, go to Step 3.
Step 3
- Turn the ignition switch ON, and shift the transmission to reverse.
- Measure the voltage at the terminal-wires of the back-up light connectors.
| Back-up light | Wire | Voltage | Action |
|---|---|---|---|
| Left | (R/G) | 12V | Next, check wire (B) |
| 0V | Go to Step 4 | ||
| (B) | 12V | Repair ground wire (B) | |
| 0V | Check for poor connection of back-up light connector | ||
| Right | (R/G) | 12V | Next, check wire (B) |
| 0V | Go to Step 4 | ||
| (B) | 12V | Repair ground wire (B) | |
| 0V | Check for poor connection of back-up light connector |
Parts & tools for this job For 1990 Mazda MX-5
- TOOLDigital multimeterSearch: automotive digital multimeter
- PARTAssorted fuse kitSearch: car fuse assortment kit
- TOOLWire crimper and connector kitSearch: wire crimper connector kit
Links open Amazon search results in a new tab. As an Amazon Associate I earn from qualifying purchases.