G. engine electrical system (TD Technical data)
- Make
- Mazda
- Model
- MX-5 (NA) Factory Workshop Manual
- Year
- 1990–1992
- Section
- Technical Data › G. engine electrical system
TD Technical dataG. engine electrical system
| Item | Specification | |
|---|---|---|
| Air cleaner | ||
| Element type | Oil permeated | |
| Accelerator cable | ||
| Free play | mm (in) | 1—3 (0.039—0.118) |
| Fuel | ||
| Specification | Unleaded regular (RON 87 or higher) | |
G. ENGINE ELECTRICAL SYSTEM
| Item | Engine model | B6 DOHC |
|---|---|---|
| Battery | Voltage V | 12, Negative ground |
| Type and capacity (5-hour rate) | S46A24L(S) (32Ah) Maintenance-free | |
| Dark current * mA | 20.0 | |
| Alternator | Type | A.C. |
| Output V-A | 12-60 | |
| Regulator type | Transistorized (built-in IC regulator) | |
| Regulated voltage | 14.1—14.7 | |
| Brush length mm (in) | Standard | 21.5 (0.85) |
| Minimum | 8 (0.31) | |
| Drive belt tension mm (in) | New | 8—9 (0.31—0.35) |
| Used | 9—10 (0.35—0.39) | |
| Starter | Type | Conventional |
| Output V-kW | 12-0.95 (Others) | |
| Brush length mm (in) | Standard | 17.0 (0.67) |
| Minimum | 11.5 (0.45) | |
| Ignition system | Type | Electronic spark advance (ESA) |
| Spark advance control | Engine control unit controls sparks advance | |
| Ignition timing | BTDC | 10° ± 1° (Test connector grounded) |
| Ignition coil | Type | Molded |
| Primary coil winding kΩ | 0.78—0.94 | |
| Secondary coil winding kΩ | 11.2—15.2 | |
| Spark plug | Type | NGK: BKR5E-11 NIPPON DENSO: K16PR-U11 BKR6E-11 K20PR-U11 BKR7E-11 K22PR-U11 |
| Plug gap mm (in) | 1.0—1.1 (0.039—0.043) | |
| Firing order | 1—3—4—2 | |
* Dark current is the constant flow of current while the ignition switch is OFF.
(i.e. engine control unit, audio etc.)
H. CLUTCH
| Item | Engine model | B6 DOHC |
|---|---|---|
| Clutch control | Hydraulic | |
| Clutch pedal | ||
| Type | Suspended | |
| Pedal ratio | 6.13 | |
| Full stroke | mm (in) | 120 (4.72) |
| Height (with carpet) | mm (in) | 175—185 (6.89—7.28) |
| Free play | mm (in) | 0.6—3.1 (0.02—0.12) |
| Distance to carpet when clutch fully disengaged mm (in) | Minimum | 68 (2.68) |
| Flywheel | ||
| Runout limit | mm (in) | 0.2 (0.008) |
| Clutch disc | ||
| Type | Single dry plate | |
Parts & tools for this job For 1990 Mazda MX-5
- PARTEngine gasket setSearch: Mazda MX-5 1990 engine gasket set
- TOOLTorque wrenchSearch: 3/8 inch torque wrench
- TOOLFeeler gauge setSearch: feeler gauge set
Links open Amazon search results in a new tab. As an Amazon Associate I earn from qualifying purchases.