On-vehicle Inspection
- Make
- Mazda
- Model
- MX-5 (NA) Factory Workshop Manual
- Year
- 1990–1992
- Section
- On-vehicle Inspection › On-vehicle Inspection
Heater and air conditioner systemsOn-vehicle Inspection
On-vehicle Inspection
Condenser
- Check for oil stains on the condenser or fittings.
- If staining is found at a fitting, replace the O-ring at the fitting.
- Charge the system and check for leaks.
- If leakage is found at a fitting or the condenser, replace parts as necessary.
- Check the condenser for the following and repair or replace as necessary.
- Cracks or damage.
- Bent fins.
- Distorted or damaged condenser inlet or outlet.
Receiver / drier
- Check for oil stains on the fittings.
- If staining is found, replace the O-ring at the fitting.
- Charge the system and check for leaks.
- If leakage is found, check and replace the receiver/drier or piping.
Parts & tools for this job For 1990 Mazda MX-5
- TOOLA/C manifold gauge setSearch: AC manifold gauge set
- TOOLUV leak detection kitSearch: AC UV leak detection kit
- PARTCabin filterSearch: Mazda MX-5 1990 cabin filter
Links open Amazon search results in a new tab. As an Amazon Associate I earn from qualifying purchases.