AT
- Make
- Mazda
- Model
- MX-5 (NA) Factory Workshop Manual
- Year
- 1990–1992
- Section
- AT (Z) › AT
Wiring diagramAT
AT
| Terminal | Input | Output | Connection to | Test condition | Voltage | Remark |
|---|---|---|---|---|---|---|
| 1A | — | — | Battery | Constant | Approx. 12V | For backup |
| 1B | ○ | Main relay | Ignition switch OFF | Approx. 0V | ||
| Ignition switch ON | Approx. 12V | |||||
| 1C | ○ | Ignition switch (Start position) | While cranking | Approx. 10V | ||
| Ignition switch ON | Approx. 0V | |||||
| 1D | ○ | ○ | Self-Diagnosis Checker (Monitor lamp) | Test switch at "SELF-TEST" Lamp illuminated for 3 sec. after ignition switch OFF→ON | Approx. 5V | With Self-Diagnosis Checker and System Selector |
| Lamp not illuminated after 3 sec. | Approx. 12V | |||||
| Test switch at "O₂ MONITOR" at idle Monitor lamp illuminated | Approx. 5V | |||||
| Test switch at "O₂ MONITOR" at idle Monitor lamp not illuminated | Approx. 12V | |||||
| 1E | ○ | ○ | Malfunction indicator lamp | Lamp illuminated for 3 sec. after ignition switch OFF→ON | Below 2.5V | With System Selector test switch at "SELF-TEST" |
| Lamp not illuminated after 3 sec. | Approx. 12V | |||||
| Lamp illuminated | Below 2.5V | |||||
| Lamp not illuminated | Approx. 12V | |||||
| 1F | ○ | ○ | Self-Diagnosis Checker (Code number) | Buzzer sound for 3 sec. after ignition switch OFF→ON | Below 2.5V | • With Self- Diagnosis Checker and System Selector • With System Selector test switch at "SELF-TEST" |
| Buzzer not sounded after 3 sec. | Approx. 12V | |||||
| Buzzer sounded | Below 2.5V | |||||
| Buzzer not sounded | Approx. 12V | |||||
| 1G | ○ | ○ | Igniter | Ignition switch ON | Approx. 0V | |
| Idle | Approx. 0.2V | |||||
| 1H | ○ | ○ | Igniter | Ignition switch ON | Approx. 0V | |
| Idle | Approx. 0.2V | |||||
| 1I | — | — | — | — | — | — |
| 1J | ○ | ○ | A/C relay | Ignition switch ON | Approx. 12V | |
| A/C switch ON at idle | Below 2.5V | |||||
| A/C switch OFF at idle | Approx. 12V | |||||
| 1K | ○ | ○ | Diagnosis connector | System Selector test switch at "O₂ MONITOR" | Approx. 12V | |
| System Selector test switch at "SELF-TEST" | Approx. 0V | |||||
| 1L | — | — | — | — | — | — |
| 1M | — | — | — | — | — | — |
| 1N | ○ | ○ | Throttle sensor (idle point) | Accelerator pedal released | Approx. 0V | Ignition switch ON |
| Accelerator pedal depressed | Approx. 12V | |||||
| 1O | ○ | ○ | Stoplight switch | Brake pedal released | 0V | |
| Brake pedal depressed | Approx. 12V | |||||
| 1P | ○ | ○ | P/S pressure switch | Ignition switch ON | Approx. 12V | |
| P/S ON (at idle) | 0V | |||||
| P/S OFF (at idle) | Approx. 12V | |||||
| 1Q | ○ | ○ | A/C switch | A/C switch ON (ignition switch ON) | Below 2.5V | Blower motor ON |
| A/C switch OFF (ignition switch ON) | Approx. 12V | |||||
| 1R | ○ | ○ | Fan switch | Fan operating (Engine coolant tempera- ture over 97°C (207°F) or diagnosis con- nector terminal TFA grounded) | Approx. 0V | |
| Fan not operating (idle) | Approx. 12V | |||||
| 1S | ○ | ○ | Blower control switch | Blower control switch at mid, high or super high position | Approx. 0V | Ignition switch ON |
| Blower control switch OFF or low | Approx. 12V | |||||
| 1T | — | — | — | — | — | — |
| 1U | ○ | ○ | Headlight switch | Headlights ON (Tail, parking, low beam/ high beam) | Approx. 12V | |
| Headlights OFF | 0V | |||||
| 1V | ○ | ○ | Neutral or clutch switch (M/T) | Neutral position or clutch pedal depressed | Approx. 0V | |
| Other conditions | Approx. 12V | |||||
| ○ | Inhibitor switch (4A/T) | N or P range | Approx. 0V | |||
| Other conditions | Approx. 12V |
| Terminal | Input | Output | Connection to | Test condition | Voltage | Remark |
|---|---|---|---|---|---|---|
| 2A | — | — | Ground (Injector) | Constant | 0V | |
| 2B | — | — | Ground (Output) | Constant | 0V | |
| 2C | — | — | Ground (CPU) | Constant | 0V | |
| 2D | — | — | Ground (Input) | Constant | 0V | |
| 2E | ○ | Crank angle sensor (Ne-signal) | Ignition switch ON | Approx. 0V or 5V | ||
| Idle | Approx. 2V | |||||
| 2F | — | — | — | — | — | — |
| 2G | ○ | Crank angle sensor (G-signal) | Ignition switch ON | Approx. 0V or 5V | ||
| Idle | Approx. 1.5V | |||||
| 2H | ○ | Ground | Constant | 0V | ||
| 2I | ○ | Open | Federal and Canada spec | Approx. 2V | ||
| 2J | ○ | Igniter | Ignition switch ON | Below 0.6V | ||
| Idle | Approx. 1V | |||||
| 2K | ○ | ○ | Airflow meter | Constant | 4.1 — 5.5V | |
| 2L | ○ | Throttle sensor (Power terminal) | Accelerator pedal released | Approx. 5V | ||
| Accelerator pedal fully depressed | Approx. 0V | |||||
| 2M | ○ | Throttle sensor (4A/T) | Accelerator pedal released | Approx. 0.5V | ||
| Accelerator pedal fully depressed | Approx. 4.0V | |||||
| 2N | ○ | ○ | Oxygen sensor | Ignition switch ON | 0V | * Engine Signal Monitor: Green and red lights flash |
| Idle (Cold engine) | 0V | |||||
| Idle (After warm-up) | 0.1 — 1V | |||||
| Increase engine speed (After warm-up) | 0.5 — 1V | |||||
| Deceleration | 0 — 0.4V | |||||
| 2O | ○ | ○ | Airflow meter | Ignition switch ON | Approx. 3.8V | |
| Idle | Approx. 3.3V | |||||
| 2P | ○ | ○ | Airflow sensor (Intake air thermosensor) | At 20°C (68°F) | Approx. 2.5V | |
| 2Q | ○ | ○ | Water thermosensor | Engine coolant temperature 20°C (68°F) | Approx. 2.5V | |
| After warm-up | Approx. 0.4V | |||||
| 2R | — | — | — | — | — | — |
| 2S | — | — | — | — | — | — |
| 2T | — | — | — | — | — | — |
| 2U | ○ | ○ | Injector (Nos. 1, 3) (Nos. 2, 4) | Ignition switch ON | Approx. 12V | |
| Idle | Approx. 12V* | |||||
| 2V | ○ | Deceleration from 3,000 rpm to 1,900 rpm (After warm-up) | Approx. 12V | |||
| 2W | ○ | ○ | ISC valve | Ignition switch ON | Approx. 7V | |
| Idle | Approx. 9V | |||||
| 2X | ○ | ○ | Solenoid valve (Purge control) | Ignition switch ON | Approx. 12V | |
| Idle | Approx. 12V | |||||
| 2Y | — | — | — | — | — | — |
| 2Z | ○ | ○ | 4A/T control unit | Ignition switch ON | Approx. 0V |
Parts & tools for this job For 1990 Mazda MX-5
- TOOLDigital multimeterSearch: automotive digital multimeter
- PARTAssorted fuse kitSearch: car fuse assortment kit
- TOOLWire crimper and connector kitSearch: wire crimper connector kit
Links open Amazon search results in a new tab. As an Amazon Associate I earn from qualifying purchases.