Keyless system]
- Make
- Mazda
- Model
- MX-5 (NC) Factory Workshop Manual
- Year
- 2006–2008
- Section
- Power Systems › Keyless system]
‹ Prev Key reminder switch removal/installation [except advancedNext › Steering lock unit inspection [advanced keyless system]
Body and cab accessoriesKeyless system]
KEYLESS SYSTEM]
- Remove the battery cover.
- Disconnect the negative battery cable. (See BATTERY REMOVAL/INSTALLATION [LF] .)
- Remove the column cover. (See COLUMN COVER REMOVAL/INSTALLATION .)
- Disconnect the key reminder switch connector.
- Remove the key reminder switch.
- Install in the reverse order of removal.
Courtesy of MAZDA MOTORS CORP.
KEY REMINDER SWITCH INSPECTION [EXCEPT ADVANCED KEYLESS SYSTEM]
- Verify that the continuity between the key reminder switch terminals is as indicated in Fig. 9 .
- If not as indicated in Fig. 9 , replace the key reminder switch.
‹ Prev Key reminder switch removal/installation [except advancedNext › Steering lock unit inspection [advanced keyless system]
Parts & tools for this job For 2006 Mazda MX-5
- TOOLTrim removal tool kitSearch: trim removal tool kit
- PARTTouch-up paintSearch: Mazda touch up paint
- PARTPanel clip assortmentSearch: Mazda panel clips assortment
As an Amazon Associate we earn from qualifying purchases.