Workshop Manuals Factory service & repair Mazda
01 General information02 Engine03 Engine performance04 Transmission05 Driveline and axles06 Suspension07 Brakes08 Steering09 Restraints10 Heating and air conditioning11 Electrical12 Accessories and equipment13 Body and cab accessories
Mazda MX-5 (NC) Factory Workshop Manual (2006-2008)10 · Heating and air conditioning
10 · Heating & A/C

Magnetic clutch adjustment

Make
Mazda
Model
MX-5 (NC) Factory Workshop Manual
Year
2006–2008
Section
Control System › Magnetic clutch adjustment
Heating and air conditioningMagnetic clutch adjustment
HVAC – Control System – figure
Fig. 16: Inserting 1 MM Thick Shim Into Shaft
Courtesy of MAZDA MOTORS CORP.

MAGNETIC CLUTCH ADJUSTMENT

  1. Measure the clearance around the entire circumference between the pressure plate and A/C compressor pulley using a thickness gauge,
  2. Inspect the clearance.
    • If not within the specification, adjust the clearance by changing the shim or the number of shims.

Magnetic clutch clearance

0.3-0.6 mm {0.012-0.023 in}

Parts & tools for this job For 2006 Mazda MX-5

As an Amazon Associate we earn from qualifying purchases.