Protege L4-1839cc 1.8L DOHC (1990)
![background image](/mazda/protege/l4-1839cc_1.8l_dohc/Page-536006.png)
(6) Loosen the camshaft cap bolts in two or three steps in the order shown in the image.
(7) Remove the camshaft caps.
(8) Measure the oil clearances.
Oil clearance:
D.035-0.081mm (0.0014-0.0032 in)
Maximum: 0.15mm (0.006 in)
(9) If the oil clearance exceeds specification, replace the cylinder head.
7. Measure the camshaft end play. If the end play exceeds specification, replace the camshaft and/or the cylinder head.
End play : 0.07-0.19mm (0.0028-0.0075 in)
Maximum: 0.20mm (0.008 in)