Protege L4-1839cc 1.8L DOHC (1990)
5. Measure the journal diameters in X and Y directions at the two points (A and B) shown.
Diameter:
25.940-25.965mm ( 1.0213-1.0222 in)
Out-of-round: 0.03mm (0.001 in) max.
6. Measure the camshaft journal oil clearances.
Caution
Do not install the HLA when measuring the oil clearance.
(1) Remove all foreign material and oil from the journals and bearing surface.
(2) Set the camshaft onto the cylinder head.
(3) Position Plastigage atop the journals in the axial direction.
(4) Install the camshaft caps according to the cap number and arrow mark.
(5) Install the camshaft cap bolts and tighten them in two or three steps in the order shown in the image.
Tightening torque:
11.3-14.2 Nm (1.15-1.45 kgf-m, 100-126 in. lbf)