Protege L4-1839cc 1.8L DOHC (1990)
Caution: Align the throttle plug assembly groove and the bolt hole of the upper valve body.
15. Set the upper control valve body onto the main control valve body.
Note:
^
Match the bolt head letters as shown.
^
If the bolts are difficult to tighten, the gasket may be out of place; remove the valve body and reset the gasket.
16. Install and loosely tighten the bolts.
17. Install the oil strainers, shift solenoid B and C, and bracket.
Note: Tighten the bolts evenly and gradually.
18. Tighten the mounting bolts.
Tightening torque:
7.9 - 10.7 Nm (80 - 110 kgf-cm, 70 - 95.4 in-lbf)