Protege L4-1839cc 1.8L DOHC (1990)
19. Install the oil strainer and torque converter clutch solenoid valve.
Tightening torque:
7.9 - 10.7 Nm (80 - 110 kgf-cm, 70 - 95.4 in-lbf)
20. Install the oil strainer and shift solenoid A.
21. Apply ATF to the new O-rings and install them onto the oil pipe assembly.
22. Install the oil pipe assembly.
Tightening torque:
7.9 - 10.7 Nm (80 - 110 kgf-cm, 70 - 95.4 in-lbf)
23. Apply ATF to a new O-ring and install it onto the oil strainer assembly.
Note: Tighten the bolts evenly and gradually.
24. Install the oil strainer.
Tightening torque:
7.9 - 10.7 Nm (80 - 110 kgf-cm, 70 - 95.4 in-lbf)