Protege DX L4-2.0L DOHC (2002)
Power Steering Oil Pump Component Disassembly Note
Caution:
^
Use the SST to prevent damage to the pump when securing it in a vise.
Oil Seal Assembly Note
1. Assemble the oil seal using the SST and a hammer.
Caution:
^
The pump body should be positioned evenly.
Vane Assembly Note
1. Place the vanes in the rotor with the rounded edges contacting the cam.
Cam Ring Assembly Note
1. Install the cam ring in the front pump body with the mark facing upward.
Rear Pump Body Assembly Note
1. After installing the rear body, manually turn the shaft to verify that it rotates smoothly.
FS
POWER STEERING OIL PUMP (FS) DISASSEMBLY/ASSEMBLY
Note:
^
The following procedure is for replacement of the O-ring and oil seal only. Replace the pump component if other repairs are necessary.
