Protege DX L4-2.0L DOHC (2002)
2. Set the SST onto the lower arm, and remove the bushing
Lower Arm Bushing (Rear) Removal Note
1. Remove the lower arm bushing using the SSTs and a press.
Lower Arm Bushing (Rear) Installation Note
1. Align the mark of the lower arm and the small projection of the lower arm bushing (rear) as shown in the figure.
2. Set the lower arm onto the SST (49 B034 211).
3. Press the new lower arm bushing using the SST (49 B034 212).
Lower Arm Bushing (Front) Installation Note
1. Install the new bushing, and pull it into the lower arm using the SST.
Dust Boot Installation Note