Protege DX L4-2.0L DOHC (2002)
Stabilizer Bar: Service and Repair
Rear
REAR STABILIZER REMOVAL/INSTALLATION
1 of 2
2 of 2
1. Remove in the order indicated in the table.
2. Install in the reverse order of removal.
Stabilizer Bushing and Bracket Installation Note
1. Align the bushing with the positioning bushing on the stabilizer bar.
2. Temporarily install the stabilizer bracket so that the slot (or elongated hole) faces downward.
3. Tighten the stabilizer bracket nut, then bolt.
STABILIZER CONTROL LINK (REAR) INSPECTION
1. Inspect the rear stabilizer control link in the same procedure as the front stabilizer control link inspection.
