Protege DX L4-2.0L DOHC (2002)
11. Verify that the gap along the upper and side edge is 8.8 mm {0.35 in}.
12. Remove the windshield.
13. Install the fasteners on the body as shown.
14. Install the fasteners and spacers onto the glass as shown.
11. Verify that the gap along the upper and side edge is 8.8 mm {0.35 in}.
12. Remove the windshield.
13. Install the fasteners on the body as shown.
14. Install the fasteners and spacers onto the glass as shown.