mazda Workshop Repair Guides

Mazda Workshop Service and Repair Manuals

Fluid Pump, A/T|Specifications|Page 2228 > < Fluid Pump, A/T|Specifications|Page 2226
Page 7
background image

1-2 Shift Valve 
Outline 
The 1-2 shift valve automatically shifts between first and second gear.
The 1-2 shift valve switches the paths for the line pressure applied to the 1-2 shift valve. The shift solenoid A ON-OFF signal is controlled by the
powertrain control module.

Operation 
With shift solenoid A OFF, line pressure (12) is applied to the right side of the valve.
This allows the valve to overcome line pressure (7) and the spring force, causing the valve to move to the left, shifting to first gear position.
Also, in 1 range, low reducing pressure (10) is transmitted to (11) in first gear, engaging the low and reverse brake.

When vehicle speed is high, the powertrain control module turns ON the shift solenoid A and line pressure (12) is drained from shift solenoid A.
Consequently, spring force and line pressure (7) working on the left end of the valve push the valve to the right, shifting to second gear position. Even
when line pressure (12) is drained, line pressure (7) does not change, due to there being an orifice.
In second gear position, line pressure (1) is transmitted to (9), engaging the 2-4 brake band with a slow pressure increase by the orifice check valve
and the 1-2 accumulator operation.
In second gear position, low reducing pressure (11) is drained, releasing the low and reverse brake.

2-3 Shift Valve 
Outline 
The 2-3 shift valve automatically shifts between second and third gear.
The 2-3 shift valve switches the paths for the line pressure applied to the 2-3 shift valve. The shift solenoid B ON-OFF signal is controlled by the
powertrain control module.

Operation 

With shift solenoid B ON, line pressure (14) is drained from shift solenoid B. Consequently, spring force and line pressure (7) push the valve to the
right, shifting to second gear position. In second gear position, line pressure (3) is closed and line pressure (13) is drained.
When vehicle speed is high, the powertrain control module turns OFF the shift solenoid B. As a result, line pressure (14) is applied to the right side of

Fluid Pump, A/T|Specifications|Page 2228 > < Fluid Pump, A/T|Specifications|Page 2226