RX7 2RTR- 1308cc 1.3L FI (1987)
Fuel Injector: Technical Service Bulletins
Fuel Injectors - Air Bleed Sockets
Category 4
Applicable Model/s 1986-1988 RX-7
Subject AIR BLEED SOCKETS
Bulletin No. 046/88
Issued
4/18/88
Revised
DESCRIPTION
When servicing fuel injectors or replacing a rotary engine with a MANA rebuilt, please be aware of the following differences between the turbo injector
air bleed sockets and the non-turbo injector air bleed sockets.
NOTE:
Turbo rotary has one piece air bleed socket and one piece mixing plate for primary injectors, whereas nonturbo rotary uses a single one piece air bleed
socket (mixing plate is built in). Care should be taken so that the air bleed sockets are not mixed up. IMPROPER INSTALLATION IS POSSIBLE.
NOTE (Turbo Model):
Please make sure of the following before installation.
