RX7 2RTR- 1308cc 1.3L Turbo FI (1989)
2. Install the second vacuum piping on the intake manifold.
3. Connect the vacuum hoses and water hoses.
4. Connect the following connectors:
(1) Intake air temperature sensor
(2) Throttle sensor
(3) Air supply solenoid valve
(4) Bypass air control valve
(5) Air bypass solenoid valve
Metering Oil Tube
Connect the oil tubes so that the colors of the tube ends match the numbers as shown.
1 White
2 Blue
3 Green
4 Yellow
Tightening torque: 9.8-14 N.m (100-140 cm-kg, 87-122 in-lb)