Tribute 2WD L4-2.3L (2005)
Principles of Operation
The SJB is located under the front passenger-side floor console. For removal information, see SMART JUNCTION BOX (SJB). For additional
information on interior lamps and illuminated entry, see INTERIOR LIGHTING. For additional information on exterior lighting, see
TROUBLESHOOTING (LIGHTING SYSTEMS). For additional information on power door locks, keyless entry keypad and RKE, see LOCKS,
LATCHES AND ENTRY SYSTEMS. For additional information on the rear windshield wiper, see WIPERS AND WASHERS. For additional
information on anti-theft, see ANTI-THEFT SYSTEM. For additional information on the climate control system, see CLIMATE CONTROL SYSTEM.
For additional information on the warning chimes, see GAUGES AND WARNING DEVICES.
CUSTOMER PREFERENCE ITEMS
NOTE: If using the WDS or equivalent Tester, select Module Configuration and Programming, then follow the screen prompts.
NOTE: Make sure module is listed as supporting customer preference items and supports the specific item to be configured; see MODULE
CONFIGURATION.
1. Select Service Bay Functions on the WDS or equivalent Tester.
2. Select the module that contains the customer preference item to be programmed. See MODULE CONFIGURATION.
3. Select Customer Preference Items on the WDS or equivalent Tester.
4. Select Module Option Content.
5. Select the item to be enabled or disabled.
6. Enable or disable the item as necessary to reflect the customer preference.
