Tribute 2WD L4-2.5L (2009)
4. Use the special tool to raise the engine 25 mm (9.98 in).
5. Remove the 3 nuts and the engine mount bracket.
-
To install, tighten to 115 Nm {11.7 kgf-m, 85 ft-lbf}.
6. Remove the 3 bolts and the engine mount.
-
To install, tighten to 55 Nm {5.6 kgf-m, 41 ft-lbf}.
7. To install, reverse the removal procedure.