Tribute 2WD L4-2.5L (2009)
2. Remove the A/C clutch disc and hub bolt.
a. Using the special tool, hold the A/C clutch disc and hub.
b. Remove the A/C clutch disc and hub bolt.
3. Remove the A/C clutch disc and hub and the A/C clutch disc and hub spacer(s).
4. Remove the A/C compressor pulley snap ring.
5. Remove the A/C compressor pulley.
a. Install the A/C compressor shaft protector.
b. Install a suitable 3-jaw puller on the special tool and A/C compressor pulley.
c. Remove the A/C compressor pulley.
CAUTION:Do not use air tools. Damage to the A/C clutch pulley or A/C compressor may result.
6. Remove the 4 A/C clutch field coil screws.
7. Remove the A/C clutch field coil.
Installation
NOTE:The A/C clutch components should be reused unless obvious signs of damage are found.
1. Visually inspect the A/C clutch disc and hub, A/C compressor pulley and A/C clutch field coil for damage.