Tribute 2WD L4-2.5L (2009)
-
Inspect for physical damage, including cracked or melted components or discoloration due to excessive heat.
-
Inspect for excessive wear, including grooving in the A/C clutch disc and hub or A/C compressor pulley that is more than fingernail depth.
-
Inspect for roughness in the A/C compressor pulley bearing.
2. Clean the A/C clutch field coil and pulley mounting surfaces.
3. Install the A/C clutch field coil.
4. Install the 4 A/C clutch field coil screws.
5. Install the A/C compressor pulley.
a. Install the A/C compressor on a suitable press.
b. Position the A/C compressor pulley on the A/C compressor.
c. Install the A/C clutch installer on the A/C compressor pulley.
d. Using the press, install the A/C compressor pulley.
CAUTION:The A/C compressor must be positioned on the press so that only the flat part of the A/C compressor housing is contacting the base with the
A/C compressor shaft aligned with the center of the press shaft. If the A/C compressor is not installed correctly on the press, the A/C compressor and/or
A/C compressor pulley will be damaged.
6. Install the A/C compressor pulley snap ring with the bevel side out.