mazda Workshop Repair Guides

Mazda Workshop Service and Repair Manuals

Condenser To Receiver Drier Line Removal/Installation|Page 6057 > < Condenser To Receiver Drier Line Removal/Installation|Page 6055
Page 1
background image

Hose/Line HVAC: Service and Repair
Compressor To Condenser Line Removal/Installation

-
COMPRESSOR TO CONDENSER LINE - 2.5L REMOVAL/INSTALLATION

NOTE:Installation of a new suction accumulator is not required when repairing the air conditioning system, except when there is physical evidence of
contamination from a failed A/C compressor or damage to the suction accumulator. 

1. With the vehicle in NEUTRAL, position it on a hoist. See  See: Maintenance/Vehicle Lifting/Service and Repair/Lifting.

2. Recover the refrigerant. See  See: Service and Repair/Discharging And Recovery.

3. Remove the RH lower engine splash shield.

4. Remove the front bumper cover. See  See: Body and Frame/Bumper/Front Bumper/Front Bumper Cover / Fascia/Service and Repair.

Condenser To Receiver Drier Line Removal/Installation|Page 6057 > < Condenser To Receiver Drier Line Removal/Installation|Page 6055