Tribute 2WD V6-3.0L (2008)
(1) Disconnect the TSS electrical connector.
(2) Remove the TSS sensor bolt.
(3) Remove the TSS sensor.
1) To install, tighten to 12 N-m (1.2 kgf-m, 9 ft-lbf).
4. Inspect the O-ring seal for nicks or cuts. Install a new O-ring seal as necessary.
Note
^
When installing the sensor, lubricate the O-ring seal with clean transaxle fluid.
5. To install, reverse the removal procedure.
