Drive Belt: Service and Repair

Make

Mazda

Model

Tribute 4WD

Engine

L4-2.3L Hybrid

Year

2008

Section

Drive Belt › Service and Repair

MaintenanceService and Repair

Drive Belt: Service and Repair

-
ACCESSORY DRIVE BELT REMOVAL/INSTALLATION - HYBRID

1. With the vehicle in NEUTRAL, position it on a hoist. See  See: Vehicle Lifting/Service and Repair/Lifting.

2. Remove the pin-type retainer, 5 bolts and the RH splash shield. 

-

To install, tighten to 9 Nm {0.9 kgf-m, 80 in-lbf}

3. Rotate the accessory drive belt tensioner counterclockwise and remove the accessory drive belt.

4. To install, reverse the removal procedure.

Pinch or Ctrl + scroll to zoom. Double-tap to reset.

03 Maintenance