Tribute 4WD L4-2.5L Hybrid (2009)
Drive Belt: Service and Repair
-
ACCESSORY DRIVE BELT - HYBRID REMOVAL/INSTALLATION
1. With the vehicle in NEUTRAL, position it on a hoist. See See: Vehicle Lifting/Service and Repair/Lifting.
2. Remove the pin-type retainer, 5 bolts and the RH splash shield.
-
To install, tighten to 9 Nm {0.9 kgf-m, 80 in-lbf}.
3. Rotate the accessory drive belt tensioner counterclockwise and remove the accessory drive belt.
4. To install, reverse the removal procedure.