Tribute 4WD L4-2.5L Hybrid (2009)
![background image](/mazda/tribute_4wd/l4-2.5l_hybrid/Page-774003.png)
4. Remove the fill plug on the side of the transaxle.
5. Fill the transaxle with clean transaxle fluid as specified until the level reaches the bottom of the fill plug hole.
6. Install the fill plug.
-
Tighten to 40 Nm {4.0 kgf-m, 30 ft-lbf}.
NOTE:Clean the area around the fill plug removing transaxle fluid that may have spilled on the transaxle case.