mazda Workshop Repair Guides

Mazda Workshop Service and Repair Manuals

Sensors and Switches - CVT > < Differential Fluid Seals - LH Removal/Installation|Page 3273
Page 4
background image

7. Start the engine and check for correct forward and reverse operation.

NOTE:The check and fill plug is located on the left side of the transaxle near the front.
NOTE:The transaxle fluid is checked and filled by removing the plug and adding fluid until it runs out. 

Sensors and Switches - CVT > < Differential Fluid Seals - LH Removal/Installation|Page 3273