Tribute 4WD L4-2.5L Hybrid (2009)
9. Install the anti-lock brake sensor harness-to-body bolt.
-
Tighten to 9 Nm {1.0 kgf-m, 80 in-lbf}
10. Install the rear wheel hub nut.
-
Tighten to 300 Nm {30.6 kgf-m, 221 ft-lbf}.
CAUTION:Do not tighten the rear wheel hub nut with the vehicle on the ground. The nut must be tightened to specification before the vehicle is
lowered onto the wheels. Wheel bearing damage will occur if the wheel bearing is loaded with the weight of the vehicle applied.
NOTE:Apply the brake to keep the halfshaft from rotating.